Frequently Asked Questions
WHAT IS THE ADVANTAGE OF THE RAPTORRAIL SYSTEM OVER OTHER GUARDRAIL SYSTEMS ON THE MARKET?
The RaptorRail™ was designed to make the roofer/construction workers’ job easier and safer, and to help bring your job under budget. Look at the graphic on the RaptorRail™ page and the main page to see how the RaptorRail™ can increase your profit margin on every job. The RaptorRail™ is fast and easy to install, fits on multiple leading edge situations, is reusable, has a huge amount of adjustability, and is environmentally friendly.
Wood Guardrails are time consuming and costly not to mention the impact it has on our environment. Cables are difficult to use and reuse, hard to see and tend to tangle during storage. With the RaptorRail™ system you will not have to worry about visibility, throwing away old wood railings, throwing away money in labor costs, or untangling cables.
Over 90% of our customers who have purchased a RaptorRail™ system have come back and purchased at least one more.
HOW DO YOU ATTACH THE RAPTORRAIL™ TO THE ROOF/SURFACE?
The RaptorRail™ is attached using one of two methods. The first being for low edge applications, this application will require the use of mechanical fastening the base to the roof/surface. The second is for parapet wall applications. The parapet clamp option uses the base to clamp the wall of the building thus requiring no mechanical fasteners.
WHY DOES THE POST BASE SWIVEL UP AND OUT OF THE WAY?
The RaptorRail™ is designed so that it can be installed and protecting users for the entire roofing project. The RaptorRail™ Base swivels up and out of the way for tear off and layup purposes. When you’re work progress advances to a mechanical fastened base simple slide in the Temporary Mid Rail Support, remove the fasteners and swivel the base out of the way. Once work is done around the Base, swivel it back into position and refasten.
WHAT TYPE OF FASTENERS SHOULD BE USED?
AES Raptor, LLC recommends using four to six - #14 coarse thread wood screws with 1 ½" penetration per screw in each RaptorRail™ Base into a solid wood based that is either an integral part of the structure or securely attached to the structure.
HOW WIDE CAN THE PARAPET EDGE BE?
The RaptorRail™ optional parapet clamp system will attach to a parapet wall up to 24" wide
CAN I BUY PARTS INDIVUALLY OR DO I HAVE TO BY THE COMPLETE RAPTORRAIL™ SYSTEM?
You can buy the RaptorRail™ parts individually or in the sets that we offer. The Complete RaptorRail™ System was designed to give you the ease of storage and transportation. Call AES Raptor, LLC at 888-990-2990 or contact us at sales@raptorsafety.com for help to determine what system and size is right for you.
IS THE RAPTORRAIL OSHA APPROVED?
OSHA regulations and standards are established as the criteria to be met in the design of products. The AES Raptor RaptorRail™ is manufactured to comply with OSHA Regulation 1926.502(b) for guardrail systems.
|
